DIY Broken Pot Mini Fairy Garden

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

There's something both whimsical and magical about this miniature fairy garden made from a broken clay pot. The cracked pieces come together to form a multitiered garden, and the little house on the top, also made from a clay pot, is a charming abode indeed. You can almost imagine the fairies buzzing about in excitement as they tend to the garden.

Advertisement

Image Credit: Jonathan Fong

Video of the Day

Things You'll Need

Image Credit: Jonathan Fong

Step 1: Make the Miniature House

We'll start with the front door. Using a hobby knife, trim craft sticks so you have one piece that is 3 inches, two that are 2 3/4 inches and two that are 2 1/2 inches.

Advertisement

Video of the Day

Image Credit: Jonathan Fong

Line up the five trimmed craft sticks. Apply superglue to another craft stick and place it across the other craft sticks to adhere them. I used the leftover piece from one of the trimmed craft sticks.

Advertisement

Image Credit: Jonathan Fong

Turn a 4-inch clay pot upside down. Glue the door to the brim of the clay pot, which is now on the bottom.

Advertisement

Image Credit: Jonathan Fong

Glue river rock pebbles around the door using superglue. Because the pot is curved and the pebbles are uneven, you'll have to experiment with the best angle to position the pebbles. Once you get the right position, you'll know it because the superglue will lock it in place.

Advertisement

Image Credit: Jonathan Fong

Glue sheet moss around any exposed sections of the clay pot. If you're having trouble with the superglue for this step because the moss is too loose, you can use a hot glue gun. The house is now finished. Let's set it aside for now.

Advertisement

Advertisement

Image Credit: Jonathan Fong

Step 2: Crack the Pot

Place a large bath towel in the clay pot, allowing one end of the towel to come out and cover the front of the pot.

Advertisement

Image Credit: Jonathan Fong

To break the clay pot, strike a hammer gently in the front where the towel is covering it. The towel helps to prevent the pot from breaking into too many pieces. Ideally, the pot is broken so that only an opening is carved out of the front. The reality is that it's very hard to control where the cracks are going to occur, as you can see from my example. But don't let the thought of breaking the pot stress you out. Even though the pot is in more pieces than we had intended, we'll just glue some pieces back together in the next step.

Advertisement

Image Credit: Jonathan Fong

Warning

Wear eye protection to protect against any flying pieces of clay when you strike the pot with a hammer.

Step 3: Reassemble the Pot

Figure out which pieces fit back together while still allowing a large opening in the front. For the pieces you want to rejoin, apply some Loctite Power Grab along the edges. It comes out like foam and is very easy to use because it stays in place.

Advertisement

Image Credit: Jonathan Fong

Place the adjacent piece on top of the piece with the adhesive and press them together firmly. It holds instantly but allows you to readjust for about 15 minutes if necessary.

Image Credit: Jonathan Fong

Step 4: Cover Seams With Pebbles

Now, we're going to take advantage of the cracked seams to give the pot a rustic design element. While the adhesive foam is still wet, place pebbles along the adhesive. Just press the pebbles into the adhesive, and they stay in place. Let the adhesive set for 24 hours.

Image Credit: Jonathan Fong

Step 5: Add the First Tier of Soil

Scoop about 3 inches of potting soil into the pot. Stuff pieces of moss in any openings to prevent the soil from spilling out.

Image Credit: Jonathan Fong

Position your largest broken piece of clay on top of the soil and stabilize it by wedging it in the soil. It also helps if one edge of the broken piece rests against the inside of the pot. If you want this piece to be higher, add more soil.

Advertisement

Image Credit: Jonathan Fong

Step 6: Add the Next Tiers of Soil

Scoop more potting soil into the pot, going up to the level of the first broken piece.

Image Credit: Jonathan Fong

Wedge another broken piece into the soil and add additional soil that goes to the top of this piece.

Image Credit: Jonathan Fong

Step 7: Place the House on Top

Position a piece of sheet moss on the top tier of soil and place the house on top of it. The moss acts as a foundation for the house and keeps it from sinking in the soil. You can also put a small piece of broken clay under the house to stabilize it.

Image Credit: Jonathan Fong

Step 8: Add Succulents

Add succulent plants to the soil. You can also plant flowers. I like using succulents because they are low maintenance and will stay relatively contained in the pot.

Advertisement

Image Credit: Jonathan Fong

Step 9: Create the Stairway

Insert small pieces of broken clay into the soil to create a stairway that goes from the bottom tier to the top.

Image Credit: Jonathan Fong

Step 10: Cover Openings With Moss

Cover loose soil with moss to help keep the soil in place. The moss also stabilizes the stairs.

Image Credit: Jonathan Fong

Step 11: Decorate With Furniture

Such a happy garden needs some outdoor furniture in which the fairies can relax. Position some fairy dollhouse furniture around the garden. Glue the pieces in place if your garden will be in a windy area, but it's most fun to leave them unattached so you can rearrange the furniture.

Image Credit: Jonathan Fong

Step 12: Display on a Saucer

Place the fairy garden on a clay saucer. The saucer helps you move the fairy garden more easily and gives it a level surface on which to sit.

Image Credit: Jonathan Fong

The saucer also allows you to add more elements so it appears that the garden overflows into the saucer. We're now ready for the fairies, but don't sit all day waiting for them to appear. They only do their magic when no one's looking.

Image Credit: Jonathan Fong

Advertisement