How to Adjust KraftMaid Drawers

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Phillips-head screwdriver

  • Tape measure

Maintain your KraftMaid drawers using their simple adjustment system.

You may notice that your KraftMaid drawer fronts are uneven. After years of use, the drawer runners can bind making it difficult to open and close the drawer. With a few simple adjustments, your KraftMaid Drawers will be as good as new. KraftMaid drawers come equipped with adjustment tabs, dials and self-adjusting suspension.

Advertisement

Drawer Fronts on Wooden Box Drawers

Step 1

Measure each side of the drawer front to determine if the panel is uneven.

Video of the Day

Step 2

Locate the adjustment tab on the side of the drawer box that hangs lower.

Advertisement

Step 3

Push the tab toward the rear of the drawer to raise the front panel.

Video of the Day

Drawer Fronts on Metal Box Drawers

Step 1

Take out the cover plate inside the drawer box.

Advertisement

Step 2

Locate two screws inside the box. One screw will raise or lower the box. The other screw adjusts the box sideways.

Step 3

Determine the appropriate screw you need to adjust.

Step 4

Adjust the panel to the correct position.

Advertisement

Adjust Sidemount Drawer Runners

Step 1

To eliminate sticking rollout trays, check the screws in the runner.

Step 2

Also check the screws in the cabinet adjacent to the drawer.

Advertisement

Step 3

Determine if the screws are loose.

Step 4

Tighten the screws to avoid rubbing against the runner or cabinet.

Adjust Undermount Drawer Runners

Step 1

Find the orange lever on the front retainer clips located on the underside of the drawer.

Advertisement

Step 2

Push the lever back to raise the drawer to the desired height.

Step 3

To lower the drawer, locate the gray levers.

Step 4

Pull the levers forward to lower the drawer.

Advertisement

references