How to Remove a Carpet Runner on Wood Stairs

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Safety goggles

  • Thick work gloves

  • Pliers

  • Flat-head screwdriver

  • Prybar

  • Hammer

Tip

Sponsored tip: Need tools for your project? Check out RentalHQ and get connected with local businesses that’ll help you rent the equipment and tools you need.

A typical carpet runner is placed from the top to the bottom of a staircase.

Carpet runners are long strips of carpeting that run down the center of hardwood stairs. In some cases stairs are completely covered with carpeting. Underneath the carpeting there may also be carpet padding. All of this is held in place with a variety of items such as staples, tacks, and tackless adhesive strips. All of these things need to be removed in a particular order to successfully remove carpet from wood stairs.

Advertisement

Step 1

Go to the bottom of the stairs. Position the nose of the pliers under the bottom edge of the carpeting and clamp the pliers shut on the bottom edge. Pull up until the bottom stair's carpeting is pulled up.

Video of the Day

Step 2

Put on heavy utility gloves, and grasp the loose bottom of the carpeting. Carefully pull up the carpeting moving up the stairs as you move along.

Step 3

Pry up tacks and staples as you encounter them using either the pliers or the tip of a flat-head screwdriver. Depending on your carpet installation, you may or may not encounter staples and tacks during the carpet removal.

Step 4

Inspect the stairs after the carpet is removed and the runner pad that may remain. Use the flat-head screwdriver or pliers to remove tacks and staples holding the runner pad in place. Note that many installations will have a separate piece of carpet pad to remove for each stair.

Advertisement

Step 5

Stick the end of a prybar behind each tackless strip revealed after removing the runner padding. Pry up each tackless strip. If needed, tap the prybar lightly with a hammer to get better leverage and a tighter grip.

Warning

Wear safety goggles and heavy utility gloves to protect yourself from flying debris. Be careful removing tacks and staples as they can be sharp.

Advertisement

Video of the Day