How to Sew a Cumberbund

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

How to Sew a Cumberbund. Wrapping the waist with a broad sash is part of traditional male dressing in India, Iran and parts of South America. The "kammerband" in India has come to be called the "cummerbund" in the West, and is worn instead of a belt and vest for formal occasions. The cummerbund is usually black and matches the bow tie, although more festive fabrics may be used for occasions like holiday parties.

Advertisement

Things You'll Need

  • Iron And Ironing Board

  • Straight Pins

  • Seam Tape

  • Matching Or Contrasting Thread For Top Stitching

  • Sewing Needles

  • Pressing Cloth

  • Sewing Machine

  • Tape Measure

  • Hook And Eye Closures

  • Boning

  • Ruler/Straight Edge

  • Grosgrain Fabric

Video of the Day

Step 1

Choose a grosgrain fabric in black or a suitable festive print. Purchase a length of fabric that is sufficient to wrap around the waist plus 3 inches.

Video of the Day

Step 2

Cut a length of fabric per the measurement in Step 1. Cut the fabric two-and-a-half times as wide as the desired width of the finished cummerbund.

Advertisement

Step 3

Iron the fabric on the wrong side. Fold under 1/2 inch and stitch in place along lower long edge. Starting at the bottom edge, fold one inch of fabric under, wrong sides together, then fold back 1/2 inch for the bottom pleat. Press well keeping the pleat straight and even.

Step 4

Press well, keeping the pleat straight and even. Topstitch the first pleat in place. Continue folding the fabric under and then back on itself and stitching the resulting pleat in place.

Advertisement

Step 5

Continue pleating until the cummerbund is about 9 inches wide. Make the cummerbund wider for a taller or long-waisted man. Turn under 1/2 inch along the top edge and stitch into place.

Step 6

Sew four boning casings, two at either side of the waist, into the sides of the cummerbund, using the seam tape. Trim the boning and slid it into the casings.

Advertisement

Step 7

Finish the short ends of the cummerbund by trimming them with matching grosgrain ribbon. Sew a hook-and-eye closure every 1/2 inch along the ribbon trim. Add a second row of hooks parallel to the first to adjust the fit of the cummerbund.

Tip

Always wear the cummerbund with the pleats facing up.

Advertisement