How to Cast Concrete Shapes

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
A wooden form for a one-time pour of a mini-pond

You can make all kinds of objects out of concrete. They will be heavy, but this can be an advantage when you want to construct something that is durable -- especially for outdoor use. You can cast your own paving stones, sculptures, wall hangings, feet, water feature basins, rocks and more. Here are some basics on how to cast different concrete shapes.

Advertisement

Step 1

A hanging sun shape

The concept is simple. To make shapes out of concrete you will want to build a form. The inside of the form will define the shape you are creating. Then when you fill your form with cement and let it harden you shake loose or break open the form and have your finished object set in solid concrete.

Video of the Day

Step 2

Coatings being rubbed over cast rock shapes.

Do your design first. Sketch it out so you know how it will look. If you are making a form for a single use, like the bowl for a small water feature, for example, you can construct it out of materials that can be broken away later. If whatever you are pouring in concrete will have layers of texture applied, you don't have to be fussy with the mold itself. You might want to simply use wood to create your form.

Advertisement

Step 3

A pre-cast mold

Make a frame or form from rough materials like wood, or more exacting and detailed molds from foam, plastic, silicone, urethanes bought from industrial suppliers or craft shops. You can even make a flat textural piece you can press into the surface of wet concrete like a mold-type stamp. There are also wonderful selections of pre-cast molds available to buy on the internet and in specialty stores.

Advertisement

Step 4

Another pre-cast mold

You will want to clean your mold before using it and, if it is a flexible mold, lightly oil the inside to keep the cement from sticking. (You can buy a lubricant or use 5W-30 motor oil.)

Advertisement

Advertisement

Step 5

Mix your cement and pour it into your mold. Portland cement creates an nice smooth concrete but is less strong than mortar. Cement mixes work well, too. For fine work you may prefer to use plaster. If you are doing something small enough to move, pour in a quarter of the mixture at a time tapping or lightly shaking the mold to release air bubbles.

Advertisement

Step 6

Wood textured concrete stepping stone

Let the cement set for 24 hours and either break away a solid mold or shake out a flexible mold to release your creation.

Advertisement

Step 7

A finished concrete stepping stone

Chip clean any little unwanted pieces and coat it with texture, leave as is or paint your final product. In the end you will have a cast concrete shape you can have for practical use or decor!

Video of the Day

Advertisement

resources