How to Make the Waist Bigger on Jeans (with Video)

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

eHow may earn compensation through affiliate links in this tutorial.

If your favorite pair of jeans have become too small in the waist, don't despair and definitely don't get rid of them. Instead, be a smarty pants and alter the waistband to fit again (even without advanced sewing skills).

Advertisement

Advertisement

Video of the Day

Things You'll Need

Image Credit: Beth Huntington

Tips

If your denim patch doesn't match exactly, err on the side of slightly darker than lighter. It'll be somewhat hidden by the center belt loop, so slightly darker will draw less attention to it.

Image Credit: Beth Huntington

1. Remove the center back belt loop

Remove the center back belt loop with a seam ripper.

Advertisement

Image Credit: Beth Huntington

2. Use a measuring tape to determine the circumference

Use a measuring tape to determine the circumference of the waistband on your jeans. Write that number down and save it for later.

Advertisement

Advertisement

Use sharp scissors to cut directly down the center back of your jeans to the back yolk. You can cut down farther if you need more room in the hips as well.

Image Credit: Beth Huntington

3. Now measure around your waist or hips

Now measure around your waist or hips where the waistband of your jeans sits. Subtract the circumference of the waistband from the circumference of your waist/hip measurement to determine the width of the denim piece you'll need to insert into your jeans. Then add 1 inch to that number for a seam allowance.

Advertisement

For example, if your waist circumference is 30 inches and your jeans waistband is 28 inches: 30-28=2+1=3. Your denim insertion piece will need to be 3 inches wide.

To determine the length of the denim insertion piece, measure the raw edge of the cut you made in the center back and add 1 inch.

Advertisement

Image Credit: Beth Huntington

4. Adjust your sewing machine to be a short stitch length and a long zigzag stitch

If you don't have a serger to finish the raw edges of your denim piece, simply adjust your sewing machine to be a short stitch length and a long zigzag stitch.

Advertisement

Advertisement

Image Credit: Beth Huntington
Image Credit: Beth Huntington

5. Sew across the top

Sew across the top of the denim piece.

Advertisement

Image Credit: Beth Huntington

6. Fold 1/2 inch of the top

Fold 1/2 inch of the top of the denim piece toward the wrong side of the denim and press.

Image Credit: Beth Huntington

7. Topstitch the top edge

Topstitch the top edge of the fold.

Advertisement

Image Credit: Beth Huntington

8. Place the denim piece under the cut in the back

Place the denim piece under the cut in the back of the jeans and mark the opening onto the insertion piece with a washable marker or tailor's chalk.

Image Credit: Beth Huntington

9. Cut 1/2 inch away

Cut 1/2 inch away from the marks you made.

Image Credit: Beth Huntington

10. Finish the raw edges of the insertion piece

Finish the raw edges of the insertion piece using the wide zigzag stitch that you used on the top edge.

Image Credit: Beth Huntington

11. Pin the denim insertion piece

Pin the denim insertion piece into the opening.

Advertisement

Image Credit: Beth Huntington

12. Change the thread in your machine

Change the thread in your machine to match your jeans and use the same wide zigzag stitch to sew the denim piece into the opening. Go slow and make sure you are catching the raw edge of the jeans. Remove the pins as you sew.

Image Credit: Beth Huntington

13. Change your machine to a narrow zigzag stitch

Change your machine to a narrow zigzag stitch, but keep it on a short stitch length. Use this stitch to reattach the belt loop to the center back of your jeans.

Image Credit: Beth Huntington

Now you can enjoy your favorite jeans again without having to hold your breath.

Image Credit: Beth Huntington

Buy materials for this tutorial:

Advertisement