How to Make Homemade Vodka

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Small home still, available from many home-brewing supply shops

  • Distilled water

  • Flaked wheat

  • Wheat malt

  • Citric acid

  • Gypsum

  • Bleach

  • Large stock pot

  • PH testing strips

  • Dairy thermometer

  • Two 30-plus liter fermenters

  • One packet vodka yeast

  • Wine-making hydrometer and cylinder

  • Straining bag

  • Activated carbon filter

While many people brew their own beer and experiment with wine making, far fewer tackle the challenge of making their own hard liquor. Distilling vodka requires only simple ingredients but somewhat more substantial equipment. Allow space, time and room for failure as you learn to make vodka. Once you can successfully make homemade vodka, experiment with adding flavors and creating infused vodkas.

Advertisement

Step 1

Assemble your vodka still. A still should have a heat source, a boiling chamber, cooling pipes and a collection bottle. Thoroughly sterilize all equipment using bleach or a sanitizing solution made for baby bottles and similar items. Be sure to also sterilize your stock pot and any utensils you will use to make your mash.

Video of the Day

Step 2

Fill a large stock pot with 23 liters of tap water to make your homemade vodka. Add 2 tsp. of gypsum to this water and mix well. Test the pH and adjust, if needed, with citric acid. Add citric acid 1/4 tsp. at a time until it's reached a pH of 5.8 or 6.0. Place the pot on the stove, cover and allow to heat to 165 degrees F.

Advertisement

Step 3

Remove from heat and stir in 8 liters of flaked winter wheat. Stir for approximately five minutes, then every five minutes until the temperature is 152 degrees F. Add 1.5 liters of malt to this mixture. Leave for 90 minutes, stirring occasionally. The mixture then may be left overnight to allow it to cool to fermentation temperatures.

Advertisement

Step 4

Use the hydrometer to check the originating gravity of the clear liquid on top of the mash once the mixture has thoroughly cooled. The measurement should be around 1.060-1.070. Transfer the mash to the fermenter and pour quickly from one fermenter to the other four to six times to aerate the wheat mash. Add a packet of vodka yeast and stir well. Allow the mixture to ferment for 72 to 84 hours.

Advertisement

Step 5

Strain the mash and place into the still. Heat the mash. The alcohol will evaporate and collect in the collection bottle. Be sure to filter through a carbon-based filter. Dilute at a ratio of 3 parts vodka to 4 parts water and bottle in sterilized bottles.

Warning

Consult books on distillation and a good brew shop. Poorly made liquor can pose health hazards. Be sure of the legalities of home distillation in your area before proceeding.

Advertisement

Video of the Day

references