How to Carve a Ball

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Pencil

  • Compass

  • Paper

  • Carbon paper

  • Whittling or pocket knife

  • Basswood block, at least 2-by-2 inches square

Carving a ball is one of those woodcarving crafts that fall into the realm of whittling. Whittling a ball is one of the simplest carving methods to master. Other than a whittling knife or a sharp pocket knife and a compass no tools are needed. A square basswood block is the best wood with which to learn. Basswood is a softer wood and is easy to carve for beginners.

Advertisement

Step 1

Use a pencil and compass to draw a circle on a piece of paper that will be centered on your wooden block.

Video of the Day

Step 2

Put carbon paper on one side of the block. Center the circle over the carbon paper and trace the circle onto the block. Repeat this step on all sides of the wooden block.

Step 3

Begin carving by removing small amounts of wood from the corners of the block. Work on one corner at a time, until you have whittled away the wood to the circle markings.

Step 4

Work each edge of the block in the same way, whittling down to the circle markings on each side.

Advertisement

Step 5

Use the knife to carve the ball smooth. You will be able to feel any high spots by running your fingers over the ball. Remove the high spots with the knife.

Tip

You can further smooth the ball you have carved with fine-grit sandpaper. Place the paper, grit side up, in the palm of one hand and rotate the ball on the paper with your other hand.

By removing small bits of wood at a time, you will be less likely to splinter the wood or make cuts that go deeper than you intended.

Warning

Cut away from your body with the knife. Carving or whittling knives should be very sharp; a single slip of the knife can cause a deep cut.

Advertisement

Video of the Day