How to Change the Blade on a Bosch Reciprocating Saw

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Reciprocating saws have the same motion as a handsaw but, because they are powered, cutting with them can be much easier and faster. All reciprocating saws also have a "Reverse" setting that will let you change the direction the blade moves to make overhead cutting easier. Only Bosch reciprocating saws have a unique toolless blade changing system that makes using their saws even faster because you can change a blade with one hand and keep on working.

Advertisement

Step 1

Hold the saw so it is braced against your body and pointed out and away from you. Do not hold it near the trigger, but support the saw by holding it by the body.

Video of the Day

Step 2

Locate the locking collar for the toolless blade changing system. The collar is the thick ring around the base of the blade where it enters the saw.

Step 3

Grab the collar with one hand, pull it toward the body of the saw and turn it counter-clockwise at the same time. The collar will loosen, and the blade will be ejected by the spring mechanism inside the collar.

Step 4

Insert your new blade into the collar and turn the collar to the right until it locks. The collar will automatically force the blade end into the right position to lock.

Tip

Know the material you are cutting. If you are cutting hard material (like metal), you will go through blades quickly. Make sure you carry the blades with you so you do not have to interrupt your work more than necessary to climb down and get a blade.

Warning

The Bosch reciprocating saw is designed to allow a gloved hand to fit between the blade guide and saw body so you can reach the collar to change the blade. You should always wear adequate work gloves when working with a reciprocating saw or changing a blade on one; even a dull blade can cause a severe cut.

Video of the Day

Advertisement

references & resources