How to Wire an Exhaust Fan to a Thermostat

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Tape measure

  • Screwdriver

  • Hammer

  • Electrical box

  • Electrical wire

  • Drywall saw

  • Wire stripper

  • Wire nuts

  • Line voltage reverse thermostat

Image Credit: Comstock/Comstock/Getty Images

Wiring a thermostat to an exhaust fan allows the fan to operate based on temperature. This set-up is especially useful in greenhouses. The thermostat used in this instance, though, isn't your typical thermostat. It's a reverse thermostat, which works by turning on the exhaust fan at a certain temperature then turning it off after the temperature has cooled adequately. These thermostats are usually line voltage, which makes them fairly easy to wire to an exhaust fan.

Advertisement

Step 1

Turn off all power to the exhaust fan. This is accomplished by turning the correct breaker off in the circuit breaker panel.

Video of the Day

Step 2

Mount an electrical box where you want the thermostat control to be located. You may need to open up drywall to mount the box to the studs in the wall.

Advertisement

Step 3

Check the amperage draw of the exhaust fan and run a suitable wire size from the switch box to the exhaust fan. The wire should have two conductors (black and white) and a ground (green). If it's 15 amps or under, you'll need 14 gauge wire; if it's between 16 and 20 amps, you'll need 12 gauge wire.

Advertisement

Step 4

Connect the wires to the fan (black to black, white to white, and green to green). Use wire nuts to make all connections.

Step 5

Remove the thermostat cover to gain access to the wiring. Connect the black wire coming from the exhaust fan to the red wire on the thermostat. Connect the white wire coming from the exhaust fan to the black wire on the thermostat. Use wire nuts to make these connections. Connect the ground wire (green) to the terminal screw in the electrical box.

Advertisement

Step 6

Fasten the thermostat body to the electrical box and push the cover back on.

Step 7

Patch any drywall if necessary and turn the power back on to the electrical circuit.

Tip

Check all local electrical codes to make sure all electrical wiring and connections are in accordance with local codes and ordinances.

Read all instruction books and manuals for the equipment you are installing for individual product differences.

Warning

Failure to turn the power off to the electrical circuit can result in electrical shock or electrocution.

Advertisement

Video of the Day

references