How to Glue Tyvek

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • 2 soft rags or cloths

  • Water-based adhesive (large-scale projects) or glue stick (for craft projects)

  • Paintbrush or sponge

  • Concrete blocks (optional)

  • Book (optional)

Tyvek, a registered trademark of DuPont, is a plasticlike synthetic material used in residential and commercial structures, office supplies and in craft projects. The material is water- and air-resistant, durable and easily cut with a utility knife. In building structures, the material is used to cover sheathing and insulation. In craft projects, Tyvek is used in bookbinding, display boards and for envelopes and pouches. When gluing Tyvek, use an adhesive that dries quickly and won't run.

Advertisement

Large-Scale Projects

Step 1

Wipe the pieces of Tyvek with a soft cloth or rag to remove any loose dust and dirt.

Video of the Day

Step 2

Lay the two pieces of Tyvek on a flat surface.

Advertisement

Step 3

Apply a layer of a water-based adhesive to one side of the piece of Tyvek you want to glue.

Step 4

Spread the glue with a paintbrush or sponge. Work quickly to keep the adhesive from drying.

Advertisement

Step 5

Place the other piece of Tyvek on top of the side of Tyvek that contains the glue.

Step 6

Press and hold the pieces of Tyvek by hand or place concrete blocks on top of the two pieces.

Step 7

Let the Tyvek pieces dry according to the recommended time on the container of water-based adhesive.

Advertisement

Small-Scale Projects

Step 1

Wipe the pieces of Tyvek with a soft cloth or rag to remove any loose dust and dirt.

Step 2

Lay the two pieces of Tyvek on a flat surface.

Advertisement

Step 3

Apply a layer of adhesive from a glue stick to one side of the piece of Tyvek you want to glue. Work quickly to keep the glue from drying.

Step 4

Place the other piece of Tyvek on top of the side of Tyvek that contains the glue.

Advertisement

Step 5

Press and hold the pieces of Tyvek by hand or place a book on top of the two pieces.

Step 6

Let the Tyvek pieces dry for 10 minutes or according to the recommended time on the side of the glue stick.

Tip

If gluing small pieces of Tyvek together, you can also use a concrete block or a vise to press the pieces of material together.

Tyvek material is durable but can be wrinkled if too much pressure is applied.

Advertisement

Video of the Day

references & resources