How to Remove Dye From Fabric

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Heavy-duty liquid laundry detergent

  • Old toothbrush

  • All-fabric oxygen bleach

  • Sponge

  • Chlorine bleach

  • Monagum thickener

  • Spoon

  • Hydrogen peroxide

Dye stains can be difficult to remove.

It is not easy to remove dye from fabric. Dyes stay bonded to fabric fibers, which is why your colorful shirt stays colorful even after repeated washings. When you accidentally get dye on fabric, such as hair coloring on a towel, blueberry stains on a shirt or a craft project mishap that ended up on your chair, it can be difficult to get the dye to release. Dye-removal techniques have varying degrees of success, depending on how long the dye has been on the fabric, the source of the dye and the nature of the fabric itself.

Advertisement

Step 1

Clean the dye stain as soon as possible. Treat the dye stain before laundering and drying, as this can set the dye permanently.

Video of the Day

Step 2

Apply heavy-duty liquid laundry detergent directly on the dye stain. Work in the detergent by rubbing the fabric against itself or scrub it in with an old toothbrush. Rinse the fabric with cool water. If the dye stain remains, proceed with the next step.

Step 3

Soak the fabric in a diluted solution of all-fabric oxygen bleach. Follow the package directions to make a diluted solution and soak the fabric for as long as the package recommends. For fixed-fabric items such as chairs, sponge the diluted solution onto the dye stain until the area is soaked. At the end of the recommended soaking time, rinse the fabric with cool water. If the dye stain remains, proceed with the next step.

Advertisement

Step 4

Check the fabric for colorfastness by applying a small amount of chlorine bleach to a hidden area such as an inside seam or hem. If the fabric changes color, do not use chlorine bleach on the fabric.

Step 5

Mix a solution of one part chlorine bleach to five parts warm water. Soak the item for 15 minutes. Rinse with cool water and inspect.

Advertisement

Step 6

Use stronger concentrations of bleach if the dye stain remains. Start with two parts chlorine bleach to five parts water and soak for 15 minutes. Increase the concentration if the dye stain remains, but do not mix the solution stronger than one part bleach to one part water.

Step 7

Rinse the fabric with cool water and inspect the fabric. A dye stain that remains after 15 minutes of bleaching is permanent.

Advertisement

Step 8

Make a bleach paste for items that cannot be soaked. Mix two parts chlorine bleach to five parts water. Add enough monagum thickener to the mix to thicken it to a paste consistency, about 1 tbsp. monagum for ½ cup liquid.

Step 9

Apply the paste quickly, before the mixture breaks down, to the dye stain using the back of a spoon. Wait three minutes and rinse the area with cool water.

Advertisement

Step 10

Neutralize the bleach, after either the soaking or the paste method, to avoid damage to the fabric. Make a solution of one part hydrogen peroxide to 10 parts water and soak, or sponge it on, the fabric.

Step 11

Allow the hydrogen peroxide solution to soak for 10 minutes. Rinse the fabric with cool water, and launder the item as usual. Any dye stain that remains is permanent.

Warning

Do not use chlorine bleach on silk or wool. The bleach can permanently damage these fabrics.

Use adequate ventilation when using chlorine bleach.

Advertisement

Video of the Day

references