How to Use a Projector to Enlarge Art

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Original art

  • Scanner

  • Computer

  • Printer

  • Transparencies (optional)

  • Projector (opaque or overhead)

  • Canvas or large paper

  • Wall

  • Table

  • Soft-lead pencil or paint and brush

The projection methodd is helpful in enlarging art for murals.

Using a projector to enlarge artwork saves time and effort over the usual grid method, and results are generally much more accurate. The projection method is most useful if the end-result will be 16"x20" or larger - any smaller, and the details may be blurry and difficult to duplicate, so the grid method would work better for smaller projects. There are two main types of projectors used for enlargement, the opaque projector and the overhead projector. They both work well, use the same principle, and are comparable in cost, so it is only a matter of what you have access to.

Advertisement

Enlarging Your Art

Step 1

Scan the original into a computer. If the original is too large to fit a home scanner, many copy centers that handle large-format work will scan the work for you.

Video of the Day

Step 2

Resize the scanned file digitally to fit the projector. Opaque projectors take originals between four and ten square inches, depending on the model. Overhead projectors usually work best with an 81/2"x11" page.

Step 3

Print the scanned file. For an opaque projector, printing onto regular printer paper is fine. For an overhead projector, you must print onto a transparency film. Printer-compatible transparency film can be found at most office-supply stores.

Step 4

Hang your canvas or large paper securely on a wall. Secure at all four corners to be sure it does not move at all while you are working.

Advertisement

Step 5

Set up the projector on a sturdy, level table. If the surface is not level, the projection can be distorted.

Step 6

Insert the print-out of the artwork into the projector. Opaque projectors have a little compartment for it to fit into, either on top of the machine or underneath, depending upon the model. Overhead projectors simply require you to lay the transparency on the glass.

Advertisement

Step 7

Turn the projector on, and turn out the lights. The darker the room is, the clearer the projection will be.

Step 8

Move the table with the projector away from the wall until the projected image is at the appropriate size and location on the canvas or large paper. Overhead projectors have a hinged mirror on the top that can be positioned to move the projection up or down as necessary. Opaque projectors lack this feature, and must be boosted by a sturdy stack of books or other objects.

Advertisement

Step 9

Focus the projector by turning the appropriate knob until the image is crisp and clear. It is helpful to look at the image from about arm's length and adjust appropriately, because although the image may look clear from the projector's location, tiny details may be blurry or lost when viewed up close.

Advertisement

Step 10

Trace the projected image onto the canvas or large paper. Some people use a soft-lead pencil to lightly sketch the image, while others prefer to block it in roughly with paint. While the entire tracing must be done in one sitting to avoid loss of alignment, the actual filling in of colors, shadows, and highlights should not be done in the dark because colors don't appear true without adequate light, and the final work will be "off".

Tip

When digitally resizing the artwork, keep the aspect ratio locked to avoid distorting the image.

Warning

Once the projection is aligned and the tracing has begun, the slightest movement of either projector or canvas can knock it out of alignment. Once alignment is lost, it is difficult to get back.

Advertisement

Video of the Day

references