How to Hang Rope Lights on the Exterior

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Rope light mounting clips

  • Screws

  • Screwdriver

  • Cable ties

  • Scissors

  • Tent stakes

  • Rubber mallet

Attach rope lights to decorative railings with cable ties.

Rope lights are an excellent choice for outdoor lighting because the clear tube that encases rope lighting can protect it from the weather. Rope lights are commonly hung under eaves to create a glow that illuminates the exterior of your home while the roof overhangs hide the lights from direct view. This is often called soffit lighting (a soffit is the underside of an overhang). You can also install exterior rope lights along ground-level pathways, exterior stairs and throughout your gardens.

Advertisement

Wall Mounting

Step 1

Place a rope light mounting clip against the exterior wall where you want soffit-style rope lighting to begin, just under the roof overhang.

Video of the Day

Step 2

Attach the clip to the wall using the screws provided or any other small screw that will not pierce all the way through your exterior siding.

Advertisement

Step 3

Attach another clip for every foot of rope light, using an additional clip before and after any corner you want your rope light to turn.

Step 4

Press the rope lights into the clips.

Hanging Lights on Railings

Step 1

Lay additional rope light along any pathways, decks or stair rails you want to light.

Advertisement

Step 2

Wrap a cable tie (also called zip tie) around the rope and any surface you want to attach it to, such as a cast iron railing, and place the tail end of the cable tie through the tie's head. Pull it tightly and cut off any excess plastic that sticks out from the tie.

Step 3

Add a cable tie at every corner or bend in the rope, plus additional ties anywhere the rope light sags. For wood decks, mounting clips can be used as noted for wall mounting, instead of cable ties.

Advertisement

Lighting Gardens and Pathways

Step 1

Lay out the rope light on the ground as you want it to rest for garden and pathway lighting.

Step 2

Pin the rope lighting in place by staking it to the ground with U-shaped tent stakes. Place a stake at any major curve or turn in the light rope, or about every 3 feet for straight runs.

Step 3

Hammer the tent stakes into the ground carefully with a rubber mallet, if necessary, making sure not to strike the rope in the process.

Advertisement

Video of the Day

references