How to Build a Closet Under a Staircase

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Saw horses

  • Electrical cord

  • Speed square

  • Tape measure

  • 20-ounce framing hammer

  • 2-by-4's

  • Framing square

  • 24-inch wide pre-hung door

  • Sheetrock

  • Sheetrock nails (1 3/4 inches long)

  • 12 or 16 penny rosin-coated nails

  • 1-by-4 wood trim

  • Four-foot level

  • Beaded metal sheetrock corners

  • Wood shims

  • Joint compound

  • Joint tape

  • Joint compound trowel tool

  • #8 bright finish nails

  • Nail set

  • Wood putty

  • Sheetrock sealer-primer

  • Top coat of paint

  • 1-by-10 shelf board

  • 1-inch dowel

  • 2 dowel brackets

  • 3-inch polyester paint brush

  • Paint tray and roller

Extra closet space always comes in handy.

Placing a closet underneath a set of stairs is a functional way to make use of existing floor space that probably does not get used often. Though the stairs are slanted you can make the ceiling level or, for a sleek design and a little extra space, you can slant the ceiling at the same angle as the stairs. Once completed the new enclosure should provide extra storage space, which is always useful.

Advertisement

The Frame

Step 1

Lay out the size of the closet on the floor. The space will consist of four new walls placed underneath a set of stairs that ascends next to a wall. Use a 2-by-4 and a level to get the front wall even with the inside portion of the outside stair stringer. Allow enough vertical space for a 24-by-80 inch pre-hung closet door.

Advertisement

Video of the Day

Step 2

Construct the side wall at the high end of the closet with 2-by-4's. You will need just one bottom and one top plate. This wall should be put together first and then inserted into place. The bottom plate can be nailed to the floor and while the top can be nailed between the insides of the stair stringers. (This determines the overall width of the wall.)

Advertisement

Step 3

Construct the low end side wall in the same manner as the high end wall and nail it into place.

Step 4

Build the rear wall (it will either have a square shape or be cut to fit under the angle of the stairs. Once this wall is in place it can be nailed to the floor, two side walls and inside face of the stringer. Make sure this wall is level before you nail.

Advertisement

Step 5

Cut and build the ceiling frame exactly to size and slide it into place and then nail it with large nails. Be aware that a slanted ceiling with involve angled cuts, but might look sharp when the closet is done.

Step 6

Build the front wall piece by piece leaving the manufacturer's recommended opening for the hollow-core door.

Advertisement

Step 7

Install a light fixture in the center of the ceiling, a switch box near the door and then have an electrician finish the wiring.

Finishing off the closet.

Step 1

Cover the inside and outside of the closet with 1/2 inch sheetrock. Nail the wallboard with 1 3/4 inch sheetrock nails.

Advertisement

Step 2

Apply sheetrock tape and joint compound to the inside corners and fill all nail holes. You will need three applications of the compound with each coat carefully sanded before the next one is applied.

Step 3

Add a strip of corner bead to the two outside corners. Carefully nail the bead with sheetrock nails and apply three separate applications of joint compound. Make sure each layer is thoroughly dry and sanded before adding the next.

Advertisement

Step 4

Install the pre-hung hollow core door. Don't forget to use shims on the hinge side to get the door perfectly level.

Step 5

Cut and nail 1-by-4 inch baseboard trim with bright finish nails to the inside and outside walls. Set the nail heads and fill with wood putty.

Advertisement

Step 6

Install a 1-by-10 wood shelf and 1-inch dowel. Each item will need brackets.

Step 7

Paint the sheetrock with the primer-sealer.

Step 8

Paint everything except the door with a top coat of paint. Choose a bright color and use a sealer on the wood trim first.

Step 9

Let the paint dry.

Tip

Make sure all walls are level.

Paneling can be used instead of sheetrock.

Sliding or folding doors can be used instead of a swinging door.

A closet under a open set of stairs in the middle of a room would probably look tacky.

Warning

Do not attach anything directly to the stairs. Just use the stringers.

Advertisement

Video of the Day

references & resources