How to Reline a Damaged Lampshade

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Seam ripper

  • Tissue paper

  • Pencil

  • Tape measure

  • Scissors

  • Straight pins

  • Fabric - muslin (or natural fiber fabric)

  • Hand sewing needle

  • Thread

Reline a damaged lampshade with a natural fiber fabric.

Relining the interior of a damaged lampshade involves hand sewing. The shade's lining gets hotter than the exterior because of the fabric's proximity to the light bulb. Because of the bulb's heat, use a natural fiber fabric such as muslin. Synthetic fabrics will melt when exposed to the bulb. Use a bulb no higher than 60-watts to ensure the lining doesn't overheat. Create a pattern, and then hand sew each panel to the interior frame.

Advertisement

Step 1

Place the shade on a table. Examine the interior top edge to determine if the lining is sewn to the frame or glued. If sewn, insert the seam ripper under a stitch, lifting upward, cutting the stitch. Continue around the top edge, until the lining top is loose. If the lining is glued, insert the ripper between the lining and the exterior covering. Wiggle the ripper to separate the adhesive from the frame. The frame's ribs and top/bottom have fabric wrapped around the metal. Gently pull the lining from the adhesive. If you can't separate the adhesive, cut the lining away. Repeat for the lining's bottom edge.

Advertisement

Video of the Day

Step 2

Look at the lining to determine how it is applied to the ribs. The lining may not be attached to the ribs. It may be sewn or glued in one or more pieces. Remove the lining from the ribs with the seam ripper if sewn, or separate from the adhesive if glued.

Step 3

Create a pattern based on one panel of the frame. Lay tissue paper over one panel. Use a pencil to rub the paper over the left/right rib and the top/bottom creating a rubbing of the panel's shape.

Advertisement

Step 4

Lay the pattern on the table. Use a ruler to measure ¼ -inch longer and wider than the rubbing lines. This is the seam allowance for turning under the raw fabric edges when sewing. Cut out the pattern.

Step 5

Pin the pattern to the fabric. Count the number of shade panels. Cut one fabric piece for each shade panel.

Advertisement

Step 6

Position a fabric panel with the fabric's right side facing "the bulb". The fabric's underside won't be visible. Fold the top edge of the fabric panel under ¼-inch. Use straight pins to secure the folded edge to the frame's top edge through the fabric on the frame (this could be rib wrapping or the interior casing from the exterior cover).

Advertisement

Step 7

Pull the fabric panel's bottom edge taut to the frame's bottom. Fold the edge under ¼-inch. Use straight pins to secure to the frame's bottom.

Step 8

Fold the left and right edge of the panel fabric under ¼-inch. Pin the edges to the left and right rib.

Advertisement

Step 9

Thread a needle with thread matching the lining. Craft Stylish Magazine suggests using a whipstitch or blindstitch. An overcast stitch can also be used. Begin at the top of the left rib: sew across the panel's top, along the right rib, across the frame's bottom, and up along the left rib. According to "Craft Stylish Magazine", aim for neat stitches.

Advertisement

Step 10

Rotate the frame to the right. Position another fabric panel over the frame panel adjacent to the previously attached fabric panel. Fold the top edge under ¼-inch. Sew it to the frame. Repeat Steps 7-9. Repeat Steps 6-10 until all fabric panels have been sewn to the frame.

Advertisement

Video of the Day

references & resources