How to Calculate MIG Wire Feed Speed

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Calipers

  • Ruler

  • Calculator

  • MIG wire

Improperly setting the feed speed on your MIG welder will result in weak weld joints or cause you to burn a hole in your metal.

Metal inert gas (MIG) welding machines automatically feed wire through the torch head of the welding gun to the weld site. This wire acts both as the electrode that arcs with the metal being welded to create the weld bead and as filler material to join the metal pieces. To ensure a proper joint is created, the MIG wire must be fed to the weld at an appropriate speed.

Advertisement

Step 1

Measure the thickness of the metals you are joining together using calipers and a ruler.

Video of the Day

Step 2

Convert the standard measurement into decimals by dividing the numerator by the denominator. For example, if your plate is 1/8 inch thick, divide 1 by 8 to get 0.125 inch.

Advertisement

Step 3

Convert your measurement into amperes. Each 100th of an inch of metal requires one ampere. Therefore, 1/8 inch thick metal requires 125 amps to properly weld the joint.

Step 4

Identify the diameter of the MIG wire that you will be using for your weld. The wire manufacturer lists a wire burn rate in inches per ampere on the packaging. For example, the 0.030 gauge wire required of 125 amp welding has a burn rate of 2 inches of wire per 125 amps.

Advertisement

Step 5

Multiply the required amperage of your weld by the burn rate associated with the diameter of the wire to calculate the feed speed. Using our example, you would multiply the 125 amps by the 2 inch burn rate to calculate a feed speed of 250 inches per minute.

Warning

Always refer to the manufacturer's instructions when learning to operate new equipment.

Advertisement

Video of the Day

references