How to Paint With Sponge Roller Techniques

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
How to Paint With Sponge Roller Techniques
Image Credit: Manuta/iStock/GettyImages

Things You'll Need

  • Drop cloth

  • Painter's tape

  • Base coat of paint

  • Paint tray

  • Paint roller (3/8-inch nap)

  • Faux glaze

  • Sponge paint roller

  • Small sea sponge

  • Trowel (8 to 10 inches wide)

  • Glaze squeegee

Using a sponge roller speeds up faux painting projects.

A sponge paint roller is used in faux painting to create a unique wall finish. It provides a way to hide wall imperfections and gives the wall a three-dimensional look. Many sponge techniques use a small, handheld sea sponge; however, when covering large walls, sponge painting walls with a roller speeds up the process. The different techniques take a little practice, but it is a satisfying project that most do-it-yourself homeowners can do.

Advertisement

Sponging-On Technique

Step 1: Clear the Room

Remove all furniture, wall hangings and electrical outlet coverings. Cover the floor near the work area with a drop cloth. Apply painter's tape to the baseboards, ceiling molding, window casings and other areas where you do not want the paint to be applied.

Advertisement

Video of the Day

Step 2: Apply the Base Coat

Pour the base coat of paint into the paint tray and roll it onto the wall's surface using a 3/8-inch nap roller. Cover the entire area and remove the painter's tape. Allow the wall to dry overnight.

Step 3: Add New Tape

Apply new painter's tape to the same areas where you do not want the finish applied.

Advertisement

Step 4: Apply Glaze With the Sponge Paint Roller

Pour the faux glaze into the paint tray. Saturate the sponge paint roller with glaze, squeeze out the excess and roll it onto the wall. Change the direction often to create a random pattern.

Step 5: Glaze Small Areas

Take a small sea sponge and apply glaze in small, tight areas and corners. Remove the painter's tape and allow the wall to thoroughly dry before hanging pictures and reinstalling electrical outlet covers.

Advertisement

Sponging-Off Technique

Step 1: Repeat the Procedure

Follow Step 1 through Step 3 of the sponging-on technique section.

Step 2: Jigsaw the Glaze

Pour the faux glaze into the paint tray and roll on a thin layer using a 3/8-inch roller. Make a random jigsaw-like pattern with your strokes. Make each section no larger than 2 to 4 feet in width. Make the edge of one section butt up against the edge of a new section. Do not overlap the glaze.

Advertisement

Step 3: Roll Over the Glaze Randomly

Take the sponge roller and with light strokes randomly roll it over the glaze before it dries. Alter the direction of your strokes for a random finish. Rinse the roller often, as the process of removing the glaze saturates the roller.

Step 4: Remove Glaze With the Sea Sponge

Take a small sea sponge to remove the glaze in small, tight areas and corners. Remove the painter's tape and allow the wall to thoroughly dry before hanging pictures and reinstalling electrical outlet covers.

Advertisement

Tuscan Faux Finish

Step 1: Repeat Site Preparation

Follow the site preparation instructions in Step 1 of the sponging-on technique section.

Advertisement

Step 2: Apply Paint With the Nap Roller

Pour the base coat of paint into the paint tray and roll it onto the wall's surface using a 3/8-inch nap roller. Cover the entire area and allow the wall to dry overnight.

Advertisement

Step 3: Add the Second Coat

Apply a heavier second coat of base paint using a sponge roller. Make the strokes go in different directions for a random look.

Step 4: Trowel Over the Second Coat

Run a trowel over the second coat immediately. With light pressure, drag the trowel across the wall in different directions, flattening out the peaks that were created by the sponge roller. Let the wall set for two hours.

Advertisement

Step 5: Add a Coat of Glaze

Apply a coat of glaze with a 3/8-inch nap roller. Immediately start to remove the glaze using a glaze squeegee. Start at the ceiling and pull the squeegee vertically to the floor. Wipe the squeegee after each stroke.

Step 6: Remove the Tape

Remove the painter's tape and allow the wall to thoroughly dry before hanging pictures and reinstalling electrical outlet covers.

Tip

When applying two coats of different-colored glaze, apply the lighter shade last to soften this first coat. Test your technique on a sample piece of board before sponge painting the walls with a roller.

Advertisement

Video of the Day

references