How to Stain Window Sills

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Paint scraper

  • 70-grit sandpaper

  • 100-grit sandpaper

  • Clean cotton cloths or rags

  • Denatured alcohol

  • Masking tape

  • Stir stick

  • Oil-based wood stain

  • Quality bristle paint brushes

  • Newspaper

  • Translucent acrylic varnish

Staining is a popular way to finish window sills.

The application of stain is a popular way to finish window sills. It allows the natural grain of the wood to shine through in the shade of your choice. To further protect your window sill, you can also apply a translucent varnish over the stain. This task requires time, care and patience but will result in an attractive and durable finish.

Advertisement

Step 1

Remove old paint or other finish from your window sill with a paint scraper and 70-grit sandpaper. Sand your window sill again with 100-grit sandpaper until it is smooth.

Video of the Day

Step 2

Vacuum the area around the sill and the window sill itself to remove dust and other debris. Wipe the window sill with a clean cloth and denatured alcohol, available from most hardware stores, and allow to dry.

Advertisement

Step 3

Cover all areas of the window and wall immediately next to the window sill with masking tape. This will shield any areas you do not wish to stain from accidental splatters and drips.

Step 4

Open and stir your wood stain with a stick until you achieve a smooth, even consistency. Dip a good-quality bristle brush into the stain and allow the bristles to soak it up. Brush the stain liberally onto the window sill.

Advertisement

Step 5

Wipe off the stain lightly and rapidly with clean cotton cloths or rags. The longer you allow the stain to stay on the wood before wiping, the darker it will become. Reapply the stain in any areas where the stain becomes too dry or sticky to remove.

Step 6

Brush any areas of the sill, such as corners, that the you couldn't reach with the rag with a clean dry paint brush. Clean the brush on an old newspaper between strokes so that it remains dry.

Advertisement

Step 7

Examine your stain finish. Brush spots that appear too light and wipe again. Wipe any spots that appear too dark with a rag dampened with paint thinner. Allow the stain to dry for 12 hours or according to the manufacturer's directions.

Step 8

Open and stir your translucent acrylic varnish with a stick until you achieve a smooth, even consistency. Dip a good-quality bristle brush into the varnish and allow the bristles to soak it up. Brush lightly onto the sill. Allow the varnish to dry according to the manufacturer's directions.

Advertisement

Step 9

Sand down the sill lightly with 220-grit sandpaper until the surface is smooth and wipe with a clean cotton cloth and denatured alcohol. Apply another coat of varnish and allow it to dry before removing the masking tape.

Tip

Test your stain on an inconspicuous area of the window sill first to ensure it will result in the finish you desire.

Discard cotton cloths or rags frequently when wiping the wood stain so that you are always wiping with a clean rag or cloth.

Warning

Do not pile together cloths or rags soaked in stain because they can be combustible. Allow them to dry separately before disposing of them.

Advertisement

Video of the Day

references