How to Use White Cement to Make Sculptures

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Portland cement

  • 5-gallon bucket

  • Paper fiber insulation

  • Paper strips

  • Fibermesh

  • Latex additive for concrete

  • Joint compound

  • Water

  • Wire

  • PVC

  • Metal rods

  • Clay modeling tools

  • Sandpaper

  • Steel wool

  • Rotary tool with cutting and grinding attachments

  • Concrete sealant

You can carve dry white cement as if it were stone.

White cement, or portland cement, is a highly refined limestone powder used as a base to create mortar or concrete. When combined with water and a binder and then allowed to dry, portland cement becomes very hard. You can mold white cement like clay while it's wet or carve it like stone after it dries. By experimenting with the content and moisture levels of the white cement base, you can make a variety of sculptures.

Advertisement

Cement Sculpting Mixture

Step 1

Put on a mask and protective gloves.

Video of the Day

Step 2

Add white portland cement with binder in a 1:1 ratio in a 5-gallon bucket. Use paper fiber insulation as binder, paper strips or fibermesh, a product designed specifically for use with concrete to provide strength and prevent cracking. Artists' preferences vary, so experiment.

Step 3

Add a concrete latex or joint compound and water in a 1:4 ratio; the latex helps to give the mixture a smooth, clay-like consistency.

Step 4

Mix with your hands until the cement sculpting base reaches the consistency of modeling clay.

Advertisement

Creating the Sculture

Step 1

Construct the armature for the sculpture. Use wire, PVC or metal rods; do not use wood as it will absorb the moisture from the cement and rot, causing the structure to fail at a later date. When constructing the armature, build the dimensions to accommodate the thickness of the cement.

Advertisement

Step 2

Add the white cement sculpting base to the armature. Start at the base of the sculpture and build upward. If the cement does not adhere to the armature or slumps, the water content is too high. Add more binder from until the cement remains firm but workable.

Step 3

Shape the cement while wet. The wet cement sculpting base will mold like clay. Use the same tools you would use to work with modeling clay.

Advertisement

Step 4

Wrap the cement sculpture in plastic to help retain moisture when you are not working. Depending on the moisture content of the cement sculpting mixture, the sculpture may retain its pliability for two or three days.

Step 5

Shape and polish the statue after the cement sculpting base begins to dry. Use sandpaper, steel wool, rotary cutting and grinding tools or other stone-carving tools to smooth the cement and create fine details.

Advertisement

Step 6

Allow the cement to cure for three days to a week, depending on the total moisture content of the cement base. The longer you allow the cement to cure, the better.

Step 7

Use a concrete sealant to cover the cement sculpture to prevent the sculpture from cracking due to changes in temperature or humidity over its lifetime. If you plan to display the sculpture outdoors, this step is imperative.

Warning

Wear protective gloves when working with wet cement. Prolonged skin exposure to portland cement mixtures can cause cracking and burning. Always wear a mask when mixing portland cement and when sanding or carving cement.

Advertisement

Video of the Day

references & resources