How to Put Backing on Rugs

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Felt

  • Scissors

  • Pins

  • Sewing machine

  • Iron

  • Needle

  • Thread

Put backing on your rugs to protect the carpet and your floors.

Applying backing to rugs not only helps them become softer underfoot, it also prolongs the life of the rug and helps to keep the rug in position. When choosing rug backing, take into consideration that the rug needs to "breathe" in order to allow moisture and air to move freely through the rug. One of the most common types of rug backing is felt, which is a breathable backing that will help to protect both floor and rug from wear and tear.

Advertisement

Step 1

Lay the felt out flat on the floor and place the rug over the top of it. Cut around the perimeter of the rug, giving an extra half inch over the size of the rug. If it is a round rug, cut small "V"s into the edge of the felt at 4-inch intervals.

Video of the Day

Step 2

Turn the rug over so that its face is on the floor and the felt is facing you. Fold a double seam along the raw edges of the felt, so that the felt is now around ¾ inch smaller than the size of the rug, and pin the seam down. For round rugs, fold over each tab between the small V-shaped cuts to create the seam. Take the felt off the rug and sew the seam together on the sewing machine.

Step 3

Replace the felt on the rug. On a medium heat, iron the felt flat on the back of the rug. If your rug is made from very delicate material, or is in any way affected by heat, do not iron, but press the felt as flat as you can with your hands.

Step 4

Thread the needle and thread. Tack the felt to the back of the rug, starting from the center. Sew a line down the center of the rub back, then move around 4 inches to one side, and sew another line, before sewing 4 inches on the other side of the center. Keep going in this way until the whole felt backing has been tacked on.

Step 5

Sew the whole perimeter of the felt backing onto the rug back.

Tip

Self-adhesive felt backing is available; however, take care that the adhesive will not affect the rug’s breathability.

Advertisement

Video of the Day

references