How to Thin Ace "Rust Stop" Enamel Paint

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Two 5-gallon buckets

  • Measuring cup

  • Mineral spirits

  • Wooden stirring stick

  • Metal-etching primer

Use water to thin water-based Rust Stop.

Ace Rust Stop Enamel is a type of rust-inhibiting paint manufactured by Ace Hardware Corporation. It is appropriate for metallic surfaces subject to moisture exposure. Unfortunately, because this coating is especially thick, it can be difficult to apply and sometimes reveals slight brush marks when it dries. You can simplify the application process and encourage a slicker finish by diluting the Rust Stop enamel prior to application. By learning the proper way to thin the finish, you will avoid creating a streaky, uneven finish.

Advertisement

Step 1

Pour one gallon of Rust Stop enamel into a 5-gallon bucket. Don't use a smaller container or you may end up with splashing once you begin the dilution process.

Video of the Day

Step 2

Determine the base of the particular can of Rust Stop you purchased before adding the appropriate thinning agent. Read the label to see if it has a water or oil base.

Step 3

Add one cup of water to water-based Rust Stop enamel; add one cup of mineral spirits to oil-based Rust Stop.

Step 4

Stir the diluted rust-inhibiting paint for a minimum of three full minutes.

Advertisement

Step 5

Lift the bucket by the handle and pour the diluted gallon of Rust Stop into the empty 5-gallon bucket. Set the bucket down; lift the bucket containing the Rust Stop enamel. Pour it back into the other empty bucket. Repeat this procedure three more times to ensure that the water or mineral spirits is evenly distributed.

Tip

If the Rust Stop still appears too thick, you may add up to two more cups of water or mineral spirits.

Warning

Rust Stop enamel paint will not bond to bare metal. Apply a metal-etching primer to bare metal before you add a Rust Stop enamel finish or chipping will ultimately result.

Advertisement

Video of the Day