How to Make a Fiberglass Helmet

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Plastic hard hat helmet

  • Fiberglass cloth

  • Fiberglass resin

  • Sand paper

  • White grease

  • Hard hat insert

  • Drill

  • Nuts and bolts

Making your own fiberglass helmet could be safer and cheaper than buying one.

Making a fiberglass helmet can be quite easy. Fiberglass is a cheap, strong and durable material that is easy to mold and set in place. Making a helmet out of fiberglass would be a cheaper, stronger and thus safer alternative to buying a common plastic hard hat. Using materials commonly found at a home building center, you too can make your own fiberglass helmet.

Advertisement

Step 1

Coat the outside surfaces of a plastic helmet with white grease to allow the helmet to be easily removed from a fiberglass mold.

Video of the Day

Step 2

Coat some small sheets of fiberglass cloth with fiberglass resin and carefully apply them to the greased surface of the plastic helmet, taking care to cover all outside surfaces evenly with layers of resin soaked fiberglass cloth. Repeat this step until there are about four layers of fiberglass cloth on the helmet.

Advertisement

Step 3

Wait two to three hours for the resin to cure and harden, after it is hard and dry to the touch, carefully remove the helmet from the fiberglass mold. Now you have an exact copy of the outside of the plastic helmet.

Step 4

Coat the inside of the fiberglass helmet mold with white grease.

Advertisement

Step 5

Cover some sheets of fiberglass mat cloth with resin and begin applying them to the inside of the mold, these sheets will become the structure of the helmet, so make sure to apply them evenly to create a strong helmet.

Step 6

Wait two to three hours before carefully removing the helmet from the greased mold.

Advertisement

Step 7

Sand the inside and outside of the helmet to create smooth surfaces. If you wish you may also paint the helmet with your desired color.

Step 8

Attach a hard hat insert to the inside of the helmet so the helmet is a snug fit for your head. Mark mounting holes on the inside of the helmet after determining the most comfortable orientation for the insert.

Advertisement

Step 9

Drill the marked holes and mount the insert to the inside of the helmet using some nuts and bolts, adjust the head strap accordingly and wear as needed.

Warning

Any homemade helmet will not be safety certified, if you are required to have a certified helmet, this will not be a suitable replacement.

Advertisement

Video of the Day

references