How to Carve Seashells

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Scallop or oyster shell

  • Stiff-bristled cleaning brush

  • Pencil

  • Rotary power tool

  • Cutting wheel bits

  • Router carving bit

  • Grinder bit

  • Sand paper

A wide variety of shell sizes, shapes and colors can be used for carving.

Similar in properties to both bone and delicate stone, seashells are a renewable carving medium that is good for beginners and experienced artisans alike. Carved shells are often seen transformed into jewelry, inlays, or small sculptures and textured art pieces. To get started with the art and craft of shell carving, try out a basic outline carving form that you can master with relative ease before trying out more complex projects.

Advertisement

Step 1

Thoroughly wash and dry the shell. If it's a fresh, natural shell you collected yourself, scrub it with a stiff-bristled brush, inside and out, and soak it overnight in a solution of one part bleach, eight parts water.

Video of the Day

Step 2

Sketch an outline of the carving design you want on the surface of the shell in pencil. Use thick, dark lines to cover the pencil, since some of the pencil may rub off as you handle it. Shade in the areas on the shell that you'll be removing and leave white the parts that will remain as the finished carving.

Advertisement

Step 3

Fit the rotary power tool with a small grinding wheel. Remove as many large chunks of material from the shell using the wheel attachment, being careful to keep from getting too close to intricate lines. Remove pieces in roughly rectangular shapes so that you can use the wheel, which only cuts straight lines.

Advertisement

Step 4

Use the conical routing attachment or carving tool to make more detailed cuts in the shape. Use a medium speed setting or a number in the middle range of the tool's speed dial. Follow the outline edges of the pencil sketch. Remove the material in many very small chunks, rather than trying to follow the cutting lines in one continuous movement.

Advertisement

Step 5

Switch to a detail grinding bit. Soften the edges of the carving using a low speed. Round the cut edges down and make them consistent across the entire carving.

Step 6

Remove the pencil lines using an eraser. Wash the shell with soap and water to remove eraser residue and any pencil that still remains.

Advertisement

Step 7

Sand the finished shell by hand using sand paper. Tear tiny pieces of sand paper, as needed, to fold and work into the edges and crevices in the carving's shape.

Tip

The thicker the shell you have, the smaller you can make the details in your carving, because the shell will be thick enough to stay sturdy.

Advertisement

Video of the Day