Can You Paint Over Metal Bathroom Partitions?

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Metal bathroom partitions have an unfortunate tendency to collect the philosophical musings of graffiti artists. Some of the more considerate members of the club will scrawl their thoughts with marker or pencil that is easily washed off. Unfortunately, others prefer to use pointed objects and scratch through the paint. When this happens, repainting is your only option.

Advertisement

Preparation

Video of the Day

As with any other painting job, preparation is the key to success. Soap, oil, glue or any foreign residue should be cleaned with an appropriate solvent before proceeding. Remove any rust spots with a wire brush before sanding. Use a fine-grade wet/dry sandpaper to scuff the entire surface. New paint will not adhere properly to the smooth finish on a metal bathroom partition.

Video of the Day

Any scratches or flaking paint should be removed and the edges feathered. You should be able to run your hand over the entire surface of the panel without feeling any bumps or dips. Paint will highlight rather than cover surface irregularities.

When the surface is smooth, remove all dust with a tack cloth before painting.

Advertisement

Masking

If you don't plan to disassemble the panels for painting, mask any hardware that is not already painted. Paint will not adhere well to stainless or galvanized steel connectors. Masking them before you paint will ease cleanup.

Advertisement

The walls should also be masked if you intend to apply the paint with a spray gun or can.

Material

Appliance paint will work well for this application. It is specially formulated to adhere well to steel. Properly applied, it provides a smooth surface that is washable and stain-resistant.

Advertisement

Enamel paints will work well and adhere to a properly prepared surface.

Latex paints should be avoided. Latex paint is more easily removed from a metal surface after drying and lacks the durability of enamel.

Advertisement

Application

A spray application will give the best results. Properly done, it will leave a surface without brush marks, bubbles or other artifacts associated with brushing or rolling.

If other considerations make spraying impractical, a high-quality bristle brush should be used. Always follow the manufacturer's recommendations for thinning, application and cleanup.

Advertisement

Other considerations

Removing and disassembling the partitions before preparation and painting will give the best results. If this is not practical, supply adequate ventilation to the work area and use breathing protection. A particle mask should be worn while sanding and a solvent or VOC mask should be worn while painting.

Advertisement

references